Fence and Gate Installation in Palm Beach County
Built for Coastal Florida,
Engineered to Last Decades
Ipe, Composite & Hardwood Fences for South Florida Homes
Why Most Fences in Palm Beach County
Fail Before Year Three
The pattern is consistent across Palm Beach County: a homeowner hires a low-bid crew, the fence looks great at installation, and within 24 months the boards are staining, the posts are shifting, and the gate won’t close straight. The cause is almost never the material. It’s the details nobody talks about in the sales conversation.
The most common failure points we see are predictable and preventable. Standard coated screws corrode within 12-18 months in coastal environments. Posts set without proper concrete footings shift with the first major rain cycle. Cut ends left untreated become entry points for moisture and insects within a single wet season.
At Extreme Decks, we’ve built over 1,500 projects across South Florida. We know what fails here and exactly why. Every decision we make on-site, from fastener specification to footing depth, is engineered against Palm Beach County’s specific climate conditions, not copied from a general installation manual.












Ipe, Composite, or Thermally Modified Wood
Which Fence Material Is Right for Your Property
Brazilian Ipe is the benchmark for oceanfront and Intracoastal properties. With a Janka hardness of 3,684 lbf and natural resistance to rot, termites, and fungal decay, it delivers a 25-40 year lifespan with minimal upkeep. A periodic oil application every 12-24 months is all it needs to hold its deep chocolate-brown tone.
Capped composite from Trex or TimberTech is the zero-maintenance solution. Fully encased in a protective polymer shell, it resists salt air, UV, and moisture with no staining, sealing, or sanding required. Manufacturer warranties run 25-30 years on fade and stain resistance.
Thermally modified pine is the fastest-growing category we install across South Florida. Kiln-treated at 400°F, it delivers the aesthetic of exotic hardwood at a more accessible price point, with genuine dimensional stability in Florida’s humidity cycles.
How We Build Every Fence and Gate in Palm Beach County
The Extreme Decks Installation Standard
Before a single post goes in the ground, we assess soil composition, grade changes, setback compliance, HOA requirements, and underground utilities. Every post is set in poured 3,000 PSI concrete footings sized to Palm Beach County wind load requirements, finished with a crown slope that directs water away from the base.
Every Ipe and hardwood board is pre-drilled before fastening. Every field cut receives end-grain sealer within 30 minutes of cutting. Every gate over 48 inches wide is built with an internal aluminum or steel frame to prevent the diagonal sag that wood-only frames develop under their own weight.
The project isn’t closed until we walk the property with you and confirm every panel is plumb and every gate swings true.
“In Palm Beach County, the fence conversation always starts with aesthetics and ends with engineering. Homeowners want to know what it looks like. We need to know what the soil is doing, how close the property is to the coast, and what the wind exposure category isv
Deck Building & Installation
Palm Beach County
Dock & Marine Structure Installation
Pergola & Shade Structure Installation
Pool Deck Construction & Renovation
Frequently Asked Questions
Why Palm Beach County Homeowners Choose Extreme Decks Over a General Fence Crew
There is no shortage of people willing to build a fence in South Florida. The difference between them and Extreme Decks comes down to one structural decision: the crew that shows up is our crew.
We do not use subcontractors. Every technician on your project is a uniformed, background-checked Extreme Decks installer with direct experience in Ipe, composite, and thermally modified wood systems across Palm Beach County’s specific coastal microclimates. Not a generalist pulled from a labor platform the morning of your project.
You also get direct access to the project manager who oversaw your installation, not a customer service queue or an automated response. When your gate needs adjustment six months after installation, you call the person who built it.
Manufacturer-certified for Trex and TimberTech systems. Permit-ready across Palm Beach County municipalities. Over 1,500 completed projects across South Florida. That accountability changes how we build, every single time.
Fence Installation Costs in Palm Beach County — What to Expect and What to Ask For
Here is what realistic pricing looks like for Palm Beach County in 2025:
Composite systems (Trex, TimberTech) range from $45 to $85 per linear foot. Ipe or Cumaru hardwood installations range from $75 to $150+ per linear foot, depending on fence height, design complexity, and gate count. Gate systems with hardware and internal framing are quoted separately and typically range from $800 to $3,500+ per gate.
Every Extreme Decks proposal includes materials, labor, permit fees, and a detailed timeline before any work begins. No generic phone estimates. No surprises after the deposit clears. If a proposal doesn’t specify the fastener grade, the concrete mix, or who pulls the permit, ask again before you sign anything.